Brizo has many features in its faucet range, and the touch or touchless feature is one of them. Touch technology in a faucet can make life easier in the kitchen. It also helps keep the kitchen hygienic. However, with time, you may face some issues with the Brizo touch sensor faucet.
If the Brizo touch faucet not working, no matter how many times you touch its body, you won’t get any water from it. Without water, you can’t do any washing or cleaning work in the kitchen. You didn’t want a manual faucet, so bought yourself a Brizo touch faucet.
Keep reading this Brizo touch faucet troubleshooting guide. It will help you get your faucet working again quickly.
Brizo Touch Faucet Not Working Try These DIY Fixes
No Water Flow
Being unable to get water to flow from your Brizo touch kitchen faucet can be a frustrating issue. A faucet is essential in every kitchen. It can be really frustrating when it suddenly stops the water flow.
The water supply to the Brizo fixture is the first thing you should examine if you run into this problem.
Plumbing maintenance often involves turning off the water supply. Sometimes, people forget to turn it back on afterward. This happens quite often. Simply turn on the water supply pilot valves for the Brizo touch fixture again. Now, your faucet’s water flow should return after doing this.
If there’s a water outage in your area, you should wait for it to be fixed before using your faucet again. Unfortunately, you can’t control this issue. But, you can contact your local water supplier to get updates on when they’ll resolve the outage.
Low Water Pressure
With low water pressure, you can’t use the Brizo touch sensor fixture at its full capacity. You won’t get enough pressure to wash dishes or fill pots. It will take more time to clean dishes with low pressure.
If shut-off valves are still open and you are not getting enough pressure from the water, the most common reason is a clogged aerator.
An aerator becomes clogged due to buildup. Minerals in the water can build up on faucet parts. This buildup can block water flow, either partially or completely.
To identify the buildup issue, check the end of the faucet spout. If there are white deposits, it means there is a buildup issue.
In this situation, look for the aerator on your Brizo fixture. Over time, minerals and debris can build up on the aerator. This buildup can lead to water flow issues.
To clean the aerator, first, remove the aerator from the faucet spout. You can normally do this by unscrewing it by hand or with pliers. Then soak the aerator in vinegar for a few hours to dissolve any mineral accumulation. After that, clean the aerator under running water and reattach it to the faucet.
Are you using a water filter with the Brizo faucet? You haven’t changed its filter for a long time. It may also cause the low water flow and Brizo touch kitchen fixture to stop working. To make your touch faucet work better and have a strong water flow, you need to change the dirty filter.
No Hot Water From the Brizo Touch Faucet
No hot water in the Brizo touch faucet is also related to the Brizo touch faucet not working problem. No hot water is also annoying, especially if you need hot water for cleaning or cooking. There are a few easy actions you can follow to solve the issue.
First, check the water heater in the kitchen. It is the main source that provides hot water to the Brizo touch-sensor faucet.
Check whether there’s water flow from the water heater is proper or not. Also, check the temperature setting of the water heater. Due to the wrong temperature setting, you won’t get hot water from the Brizo sensor faucet.
If the water heater pipes are blocked due to buildup, you need to clean them or replace them.
The Sensor Is Not Working Properly
The Brizo touch kitchen faucet has a special feature that sets it apart from regular faucets. This feature is the touch feature. So what happens if the sensor isn’t functioning properly? The result is a non-working Brizo touch faucet.
If the sensor is not working, you tap your hands all over the faucet but no water comes out.
Get Instant Solutions For Your Home Issues For Free - Chat With Experts
Get Paid For Your Opinion With Online Surveys - Start Earning
Debris and dirt accumulation are among the most frequent reasons for sensor failures.
Regularly cleaning the faucet’s body is important. It helps the sensor work well, even if you don’t touch the faucet. Over time, dirt and debris can accumulate on the faucet. They can disrupt the sensor’s ability to detect motion.
Cleaning your Brizo touchless kitchen faucet is easy. Start by making a cleaning solution using baking soda and water.
Next, gently scrub the faucet’s body using a cloth soaked in this mixture. Pay special attention to the area around the sensor. After that, dry the faucet’s body with a dry cloth and wipe away any remaining water.
You can make sure the sensor in your Brizo touchless kitchen faucet is always working. You can do this by taking a few minutes to clean it.
You can make sure the sensor in your Brizo touchless kitchen faucet is always working. You can do this by taking a few minutes to clean it.
Battery Issue
Sometimes Brizo touch faucet doesn’t work because of battery problems. Your Brizo kitchen faucet may stop working entirely due to a low or dead battery. This is a common problem in Brizo touch-activated faucets.
There are a lot of signs that your Brizo Touch kitchen faucet’s battery needs to be replaced. A broken sensor, poor water pressure, or even no water flow at all are common signs.
It’s important to swap out the batteries. You should do this whenever they run low. This helps prevent any Brizo touch faucet problems.
Open the battery compartment on your faucet. Look at the battery indicator LED light. This helps you verify battery status quickly and easily. The batteries are running low and must be changed if the LED light is flashing red.
The method of changing the batteries is simple. First, remove the old batteries from the battery box. Then, install the new batteries.
But don’t forget to look for any rust or corrosion on the battery connectors. If you do find any rust, just wipe it off with WD-40 before installing the new batteries.
Faulty Solenoid Valve
A solenoid valve is an important part of any touch faucet. If the solenoid valve in the touch faucet is faulty, your Brizo smart touch faucet won’t work. Here are the steps to replace the solenoid valve.
- Turn off the water supply to the faucet.
- Disconnect the battery pack or unplug the faucet from the power source.
- Remove the spout from the faucet body by unscrewing it counterclockwise.
- Locate the solenoid valve assembly at the base of the Brizo touch faucet body.
- Disconnect the wires from the valve by pulling them apart.
- Use needle-nose pliers to remove the blue filter inside the solenoid valve.
- Unscrew the solenoid valve from the faucet body by turning it counterclockwise.
- Install the new solenoid valve by screwing it into the faucet body clockwise.
- Reinstall the blue filter inside the new valve.
- Reconnect the wires to the new solenoid valve.
- Reinstall the spout onto the faucet body by screwing it clockwise.
- Turn on the water supply and test the faucet to make sure it’s working properly.
Check also –
How To Reset Brizo Smart Touch Faucet?
Resetting your Brizo touch kitchen faucet can be a simple solution to fix any minor issues that you may be experiencing with the faucet.
- To begin, shut off the water flow to the faucet.
- Next, turn off the water supply to the faucet. Unplug the control box placed beneath the sink to reset the Brizo faucet.
- Allow a few seconds (about 30 seconds) for any residual power to dissipate.
- Reconnect the faucet’s power source by plugging the control box back in.
- Switch on the faucet’s water supply.
- Next, test your touch faucet to ensure it is operational. Wave your hand over the sensor to see if the water flow begins and ends normally.
How Do You Turn Off a Motion Sensor Brizo Faucet?
If your Brizo motion sensor faucet is giving you trouble, you can make it work like a regular faucet for a while. You don’t need a plumber for this.
To turn off both sensors, simply put your hands in front of both sensors at the same time for about 10 seconds.
Once you do this, you’ll notice the Ready Sensor (the one in front of the faucet) will flash a blue light twice. Once you see the blue flashing light, you can move your hands away and turn off the water.
Frequently Asked Questions
Is Brizo Owned By Delta?
Yes, Delta Faucet Company, a division of Masco Corporation, is the owner of Brizo. Delta Faucet Company is a top producer of kitchen and bathroom faucets. They own various brands like Delta, Brizo, Peerless, and Hansgrohe. Brizo is well-known for its luxurious designs. Many homeowners like it. They use Brizo to make their kitchens and bathrooms more sophisticated.
Why Red Light Is Blinking in My Brizo Smart Touch Kitchen Faucet?
A blinking red light is a clear indication of low battery status. It means your Brizo faucet won’t work properly until you change the batteries. Under the sink, you can replace the batteries from the battery box. This blinking is a good feature to indicate that it’s time to change the batteries of the faucet.
James Lewis is a seasoned plumber and faucet enthusiast who shares his expertise on Faucetsavvy.com. With over 15 years of experience in the plumbing industry, he’s passionate about helping homeowners find the perfect faucet for their needs. He’s also dedicated to empowering DIY enthusiasts with the plumbing knowledge and skills needed to repair and maintain their faucets.