Touchless faucets are well known for their convenient and hygienic use in the kitchen and bathroom. Their easy-to-use design with a sleek and modern look is very useful in modern days. Touchless faucets activate water flow when their sensor gets a signal. Their sensor requires power to work flawlessly.
Touchless faucets use batteries to give power their sensor. You should know the touchless faucet battery replacement process so that when batteries are dead, you can replace them yourselves.
Where Is The Battery Located on a Touchless Faucet?
Touchless faucets are built to give convenience to users to use the faucet without touching the handle. These faucets rely on batteries to get power.
Generally, batteries are found in the control box. This control box is usually located under the sink, near the water supply lines. It may be attached to the wall or the cabinet. When you need to replace the touchless faucet batteries, you need to go under the sink for the replacement.
Read also – Upgrade Your Kitchen: Best Touch Faucets for Modern Homes
Touchless Faucet Battery Replacement Step-by-Step Process
Step 1: Preparation
During the battery replacement process, it is a good idea to turn off the water supply. The battery gives power to the sensor and when you replace batteries, the sensor may turn on or off water. So, close the shut-off valve to prevent any accidental water damage.
The battery box is found under the sink. In many kitchens, under sink cabinets, proper lighting is not available. Get a flashlight for proper lighting. Also, clear out any clutter from under the sink and create a clean workspace, ensuring there is enough room for you to work there comfortably.
Step 2: Accessing the Battery Compartment
There is a control box under the sink cabinet. Look for the small panel or cover that can be removed to access the compartment.
When you find out the control box that contains the batteries, carefully open or remove its cover. Depending on the design, you may need to unscrew the cover or gently pry it open using a flat-head screwdriver. Take care not to damage any components or wiring in the process.
Step 3: Removing the Old Batteries
Before removing old batteries, you must check how old batteries are connected to the control box. It will help you to connect new batteries properly. You may take photos of the connection of old batteries before removing them.
Old batteries may be secured with metal or plastic clips, wires, or battery holders. Using your fingers or a small tool, gently disconnect the old battery from its connections. If there are clips or a battery holder, release them carefully.
Step 4: Inserting the New Batteries
Before inserting the new battery, double-check its polarity. Most touchless faucets use AA or AAA batteries, and the battery terminals should be clearly marked. Match the positive (+) and negative (-) terminals of the new battery with the corresponding markings in the battery compartment.
Carefully place new batteries in the control box. Ensure batteries are fitted snugly. If there is a clip or battery holder, use them to secure new batteries in their place. Make sure the battery connections are firm but not overly tight.
If you removed any covers or panels to access the battery compartment, carefully reinstall them. Make sure they are securely fastened to protect the battery and internal components.
Step 5: Testing the Faucet
When the touchless faucet battery replacement process is completed, turn on the water supply of the faucet. Test the faucet by placing your hand in front of the sensor. Now the sensor will work properly and the water will turn on or off quickly. Test both the hot and cold water settings to ensure everything is functioning correctly.
How Do I Know If My Touchless Faucet Battery Needs Replacement?
There are various signs that indicate it’s time to replace your touchless faucet battery.
- If your touchless faucet has a blinking LED indicator, it will start blinking and it is a sign of low battery. It will give you a hint that you should change the batteries.
- Due to low battery, the touchless faucet sensor won’t respond properly and water flow is affected. It will show inconsistency to detect hand movement. The sensor’s ability to detect motion and activate the water flow may be compromised due to low battery.
- If you notice a decrease in the water flow or the water pressure seems weaker than usual, it could be a sign that the battery is running low.
- In some touchless faucets models, the beep sound starts when the battery is about to die. If you hear such signals, it’s a clear indication that the touchless faucet battery needs replacement.
Are All Touchless Faucets Battery-Operated?
It’s not true that all touchless faucets are battery-operated. But most touchless faucets are battery-powered. There are some touchless faucets that use alternative power sources such as direct AC power from the home electricity supply.
AC-powered touchless faucets are connected directly to the electrical supply of the house. Their main advantage is they don’t need any battery replacement. But they have a big disadvantage that if there is no electricity in the house, you can’t use their touchless feature.
Some touchless faucets utilize a hybrid system where they can be powered by batteries as a backup in case of power outages or when an electrical connection is not available. This configuration provides the convenience of touchless operation while ensuring uninterrupted functionality.
How Long Do Batteries Last In Touchless Faucets?
The life of the touchless faucet batteries depends on different factors. However, as a general guideline, touchless faucet batteries typically last between 6 to 24 months. Here are some factors that affect battery life.
Get Instant Solutions For Your Home Issues For Free - Chat With Experts
Get Paid For Your Opinion With Online Surveys - Start Earning
- The more you use the touchless faucet, the faster the batteries may drain.
- The quality of batteries is also important. High-quality batteries give a better life and performance.
- In some touchless faucets, you can adjust the sensitivity of the sensor. Higher sensitivity settings can lead to more frequent activation of the faucet, potentially reducing battery life.
- Certain touchless faucets are designed with power-saving features, such as auto-shutoff timers or low-power consumption in standby mode. These features can help prolong battery life.
FAQs
Can I Replace The Touchless Faucet Battery Myself?
Yes, you can replace the touchless faucet battery yourself. The touchless faucet battery replacement process is not tough. In the above steps, you can clearly see that you can replace it easily without the help of any extra person.
Do Touchless Faucets Work Without Power?
Yes, touchless faucets work without power but not all models. Some brands give functionality in their touchless faucets to work manually with the handle. When their batteries die, you can use their handle for manual operating.
Do Sensor Taps Need Electricity?
It depends on which sensor tap you are using. If your sensor tap is operated through batteries, you don’t require electricity.
Can I Use a Different Brand or Type of Battery In My Touchless Faucet If It Fits?
It is generally recommended to use the brand and type of battery specified by the manufacturer for your touchless faucet. Manufacturers often recommend specific batteries based on their performance and compatibility with the faucet’s electrical components. While a different brand or type of battery may physically fit in the battery compartment, it may not provide the optimal voltage or performance required for the faucet to function correctly.
Final Thoughts
It is generally recommended to use the brand and type of battery specified by the manufacturer for your touchless faucet. Manufacturers often recommend specific batteries based on their performance and compatibility with the faucet’s electrical components. While a different brand or type of battery may physically fit in the battery compartment, it may not provide the optimal voltage or performance required for the faucet to function correctly.
Related Articles –
James Lewis is a seasoned plumber and faucet enthusiast who shares his expertise on Faucetsavvy.com. With over 15 years of experience in the plumbing industry, he’s passionate about helping homeowners find the perfect faucet for their needs. He’s also dedicated to empowering DIY enthusiasts with the plumbing knowledge and skills needed to repair and maintain their faucets.