Moen Motionsense faucets are built with advanced technologies but it is possible that you may encounter a leak at some point. If you call a professional to fix the drip, it will be a costly process. So, why not explore some simple and cost-effective solutions to fix the Moen Motionsense faucet dripping issue?
What Cause Moen Motionsense Faucet To Drip?
- Worn-out Cartridge – A worn-out cartridge is one of the major reasons for a leaking faucet. The cartridge controls the flow of water in the faucet. It moves with the handle movement and regulates hot and cold water. But with time, due to continuous use and exposure to water, the cartridge becomes worn out.
- Loose or Damaged O-Rings – O-rings are used to prevent water leaks in the different parts of the faucet. However, due to frequent usage, temperature fluctuations, and exposure to chemicals in water, O-rings can become loose, worn, or damaged. Due to this water seep through the gaps in faucet parts.
- Corroded Valve Seat – The valve seat is placed between the faucet body and the spout. It acts as a sealing surface for the faucet’s internal mechanisms. But with time, due to mineral deposits, the valve seat becomes corroded and water starts dripping from the Moen Motionsense faucet.
- Faulty Sensor – Moen Motionsense faucets are built with the sensor. If the sensor is not in good condition, it won’t detect hand movement. A faulty sensor will start watering anytime and becomes a reason for water dripping.
How To Fix Moen Motionsense Faucet Dripping?
Before fixing the Moen Motionsense faucet dripping, turn off the water supply to the faucet. To stop dripping, you need a few tools such as an adjustable wrench, pliers, a screwdriver, and a clean cloth or sponge.
Check to see whether the batteries in your Moen Motionsense faucet are low or empty. Check to see whether the dripping issue is resolved by replacing the batteries with new ones.
Checking and Adjusting The Water Supply Connections
Inspect the supply lines for water that is attached to the faucet. Check for any broken or loose hoses or connections. With an adjustable wrench, tighten any loose connections.
Dripping problems might result from high water pressure. To determine the water pressure entering your home, use a pressure gauge. Consider installing a pressure regulator to lower the pressure if it rises above the advised level (usually between 40 and 80 psi).
Inspecting and Cleaning The Sensor Components
The function of Moen Motionsense faucets might be impacted by sensors that over time gather dirt or debris. Use a soft cloth or sponge that has been soaked with warm water and mild soap to gently wipe the sensor area. Avoid using anything that can harm the sensor, such as harsh cleansers or rough materials.
Verify whether anything, including items or soap residue, is blocking the sensor region. Remove anything that can prevent the sensor from working properly.
The aerator on the faucet should be taken out and carefully cleaned. Dripping may result from deposits or debris in the aerator that interfere with water flow. To get rid of any mineral buildup, soak the aerator in vinegar or a descaling solution.
Replacing Worn-out or Faulty Parts
The O-rings and cartridges inside the faucet may deteriorate or wear out over time, which will cause leakage. To get the right replacement components, see the manufacturer’s instructions or get in touch with Moen customer service. To change the O-rings and cartridges, carefully follow the instructions.
If cleaning the sensor’s parts doesn’t stop the dripping, the sensor itself may have a problem. To learn more about sensor replacement possibilities in such situations, get in touch with Moen customer support or a licensed plumber.
Potential Consequences of Ignoring Dripping Issues
- When you ignore a dripping Moen Motionsense faucet, it will lead to water waste. Even a small drip every second will waste a significant amount of water. It will cost you a higher water bill.
- Continuous dripping of faucets will cause problems in the surrounding area. Countertops and cabinetry will be damaged due to constant exposure to water. With time, this damage increases and increases the cost of the repair.
- A dripping faucet’s accumulated water can produce a damp atmosphere that encourages the development of mold and mildew. These need to be fixed quickly because they can cause health problems.
- O-rings and cartridges in faucets can deteriorate more quickly when they drip continuously. Over time, this could result in more leaks and more serious harm to the faucet, necessitating expensive repairs or replacement.
- The rest of the plumbing system’s water pressure may suffer as a result of a dripping faucet. This may have an impact on other fixtures and reduce the effectiveness and enjoyment of routine activities like taking a shower or doing the dishes.
Read also – Say Goodbye to Leaking Outdoor Faucets When Turned On
James Lewis is a seasoned plumber and faucet enthusiast who shares his expertise on Faucetsavvy.com. With over 15 years of experience in the plumbing industry, he’s passionate about helping homeowners find the perfect faucet for their needs. He’s also dedicated to empowering DIY enthusiasts with the plumbing knowledge and skills needed to repair and maintain their faucets.