After completing your dinner, you go into the kitchen and turn on your Jacuzzi Lyndsay faucet to wash dishes but you find the water flow is not as usual. You check other faucets and they all have good water flow then the problem is with the aerator of Jacuzzi Lyndsay. If you haven’t cleaned the aerator for a long time, the aerator gets blocked and restricts the flow of water.
Fortunately, the Jacuzzi Lyndsay faucet aerator removal process is not complicated. By using a hand or pliers, you can remove the Jacuzzi Lyndsay faucet aerator. The detailed process of removing the aerator for safety is explained in the article. So, don’t forget to read through all of the following guidelines.
Jacuzzi Lyndsay Faucet Aerator Removal By Hand
The aerator in the Jacuzzi Lyndsay faucet works similarly to other faucet aerators. By cleaning the aerator, you can get back the normal flow of the water. Also, you can remove it permanently but it will cost you a high water bill.
To remove the Jacuzzi Lyndsay faucet aerator, you should start with your hands. Don’t rust to get any tools from the store. If the aerator is not stuck, your hands are enough to open it.
Remember your hand and faucet should be dry. With a wet hand and faucet, you can’t make a tight grip on the aerator. Your hand will slip from the aerator if there is water. Take a dry cloth and dry the aerator and hand with it.
Now make grab the aerator with your hand and make a tight grip on it and turn it in the opposite direction to the way you screwed it first. if the aerator comes out, clean it or replace it with a new one.
But you have tried enough with your hand and still aerator is in its place, you need to use tools to remove the aerator of the Jacuzzi Lyndsay faucet such as pliers or wrench, a hair dryer, and penetration oil. Try to use these tools one by one to remove the aerator. One of them definitely helps you to take out the aerator.
Take the Help of a Plier or Wrench To Separate The Aerator
Plier is the most common tool that is found in every house. It is used for different plumbing works and you can also use it to separate the aerator from the Jacuzzi Lyndsay faucet.
You tried with your hands but you didn’t get success. It’s time to use a plier or wrench. The process of using a plier or wrench is the same. You can use any one from both of them on the basis of availability.
Take the plier and catch the aerator with it. Make sure, you only catch the aerator, and the faucet spout is safe from the plier otherwise it will damage the faucet. Here you can do one thing, cover the faucet spout with a cloth to protect it from the plier.
Move the plier in the opposite direction of the clock. Use your power to remove the stuck aerator. You can use a wrench instead of a plier, the process is the same as a plier. In most cases, the Jacuzzi Lyndsay faucet aerator comes out when you use a plier or wrench.
Use Oil To Loosen The Aerator
If you haven’t removed the aerator for a long time, it becomes stuck in its place and won’t come out easily. It may happen due to buildup, rust, and corrosion.
If this is the situation, you can use to loosen the aerator. Spray any oil on the aerator. When the oil will go inside the aerator it will help to loosen the tight connection between the aerator and its threads. You have to give some time to oil to perform its work.
After some time, clean the oil from the aerator. Now take a plier to separate the aerator from the Jacuzzi Lyndsay faucet.
Use Hair Dryer To Loosen The Aerator
You have tried pliers or wrenches. Also, you applied oil on the aerator but still, it is not coming out. Don’t worry, a hair dryer is helpful in this situation. But don’t use the hair dryer if the aerator is made of plastic.
Turn on the hair dryer and start heating the aerator. You only have to heat up it a little bit. The heat with expand the metal of the Jacuzzi Lyndsay faucet aerator and then the aerator will come out easily by hand or plier.
Safety You Should Follow While Using Any Tool
When you use any tool while the Jacuzzi Lyndsay faucet aerator removal process, you have to be careful otherwise both the faucet and aerator may get damaged.
Never push and grip the tool too hard on the aerator. The aerator threads are not strong to bear extreme pressure. If you want to use the old aerator again after cleaning, you should remove it safely without damaging it.
If the tool slips from its position, it may create scratches on the faucet. You have to cautiously use the tool to prevent any damage to the faucet. For more safety wrap the faucet with a rag before using the tool.
When you use a tool and the aerator doesn’t come out after all the effort, don’t overdo the removal process. You should try another tool to separate it.
Get Instant Solutions For Your Home Issues For Free - Chat With Experts
Get Paid For Your Opinion With Online Surveys - Start Earning
Read also – Easy DIY Hack: Removing a Recessed Faucet Aerator without Special Tools
How To Clean Jacuzzi Lyndsay Faucet Aerator To Reuse It?
So, now you have finally removed the aerator, what next. If the aerator is not damaged and is only clogged by debris, you can reuse it after cleaning.
Take a bowl and fill it with white vinegar and mix half the amount of water into it. Now soak the aerator into the bowl for an hour. Later take it out and start scrubbing it with a brush. It will remove the debris from its holes.
You can repeat this process 2-3 times until you don’t get clean holes in the Jacuzzi Lyndsay faucet aerator.
If there is rust and corrosion on the Jacuzzi Lyndsay faucet aerator, you should not use it again. Instead of the old aerator, get a new one that will provide you with better water flow.
Final Thoughts
Jacuzzi Lyndsay faucet gives a good flow of water until its aerator is in good condition. When the aerator holes are clogged, you should clean them. If the aerator is rusted or damaged, you should remove it and install a new one.
This Jacuzzi Lyndsay faucet aerator removal process shows you the best way to remove the aerator. Start removing it with the hand and if it doesn’t work, use a plier or wrench to loosen the aerator.
James Lewis is a seasoned plumber and faucet enthusiast who shares his expertise on Faucetsavvy.com. With over 15 years of experience in the plumbing industry, he’s passionate about helping homeowners find the perfect faucet for their needs. He’s also dedicated to empowering DIY enthusiasts with the plumbing knowledge and skills needed to repair and maintain their faucets.