How to Remove a Delta Kitchen Faucet?

Delta kitchen faucets are one of the widely used faucets for commercial and residential use. But at some point, every faucet needs an upgrade. Because with time, they are not as functional as a new faucet. They start to wear and tear and stop working.

Whatever the reason, to install a new one, first you need to remove the old faucet. Maybe possible, you don’t know much about plumbing and searching how to remove a Delta kitchen faucet. You are going to call a plumber to remove the faucet. But wait, the removal process of the Delta kitchen faucet is straightforward and far easier than it seems and appears to be.

With proper guidance, anyone can easily remove and install a new Moen faucet. By following our guide, you can do it easily by saving money and time.

How to Remove a Delta Kitchen Faucet?

How to Remove a Delta Kitchen Faucet
How to Remove a Delta Kitchen Faucet

To make the removal process easy, you need the right tools. With the right tools in hand, within minutes, you can remove a Delta single-handle kitchen sink faucet.

If you don’t have the right tools, the process is not simple and also you may damage the faucet. The wrong tools won’t fit on the faucet parts. Get these tools before starting to remove the Delta kitchen faucet.

  • Hex wrench to remove the faucet handle screw.
  • An adjustable wrench to remove other screws of the faucet.
  • A Philips head screwdriver
  • A flat-head screwdriver
  • A bucket to collect residual water
  • Flashlight to see under the cabinet

When you have all these tools, you can start the removal process. Make sure you have turned off the water supply of the faucet.

You should place the bucket under the water supply line connections so that when you remove them from the Delta kitchen sink faucet, the water drains into the bucket. Here the actual process of removing the Delta faucet starts.

Dry The Faucet and Pipes

Before you start removing the screws of the Delta kitchen faucet make sure its pipes are empty. For this, turn the handle of the Delta faucet into the on position. It will let drain remaining water from the pipe. If you forget this step, it’s a high chance that while removing the process, water drains on the floor and creates a mess around the sink.

Remove The Faucet Handle

The handle of the Delta kitchen faucet is fixed by a screw. It may be a hex screw or simple screw according to the faucet model. Use either the screwdriver or hex wrench to remove the screw. Remove the screw gently and then take the handle off slowly and carefully.

homefix

After removing the handle, you get a clear view of its inside parts. It will give you an idea of any potential issues in the faucet, be it a significant leak, a defective rubber gasket, or an alternative concern.

Observe the handle parts closely, you will find a dome-like structure with a protective jacket. An adjustable wrench is the right tool to remove it. Engage the wrench on it and starts turning to remove it.

Remove Under Sink Screws and Supply Lines

After removing the handle parts, you can take out the Delta sink fixture. It is connected to the waterline supply of the faucet so handle it with care to avoid any damage to the waterline.

survey

The faucet is tightened at the sinkhole with screws. Here screwdriver comes in use. Remove all screws carefully. For removing screws, you need to go under the sink cabinet. Adjust yourself in the cabinet and starts loosening the screws.

After removing the screws, you can take off the white ring under it. This ring creates a watertight seal. You should keep this seal in a safe place so that when you install a new faucet, you can reuse this ring if your new faucet doesn’t have a ring.

Now it’s time to remove the water supply lines of the Delta kitchen tap. Use an adjustable wrench to loosen the water supply lines.

Lift The Delta Kitchen Faucet Spout

Now you are ready to lift the Delta kitchen faucet spout. You have removed all its connections and screws so you won’t be any trouble lifting it.

Gently lift the spout in an upward direction. Under the spout, there would be a clip. Use a screwdriver to remove the clip. Without removing the clip, if you try to lift the spout, you can damage the faucet. Now lift the faucet to remove it from the sink.

Read also – How To Remove a Moen Kitchen Faucet?

How To Remove a Delta Double Handle Kitchen Faucet?

How To Remove a Delta Double Handle Kitchen Faucet?
How To Remove a Delta Double Handle Kitchen Faucet?
  • Locate the water shut-off valves under the sink and fully close them by turning them clockwise. This will turn off the faucet’s water supply.
  • The water supply lines from the hot and cold water valves linked to the Delta sink faucet should be loosened and disconnected using a wrench.
  • On the top of each handle, look for small decorative plugs or covers. Typically, a flat-head screwdriver or your fingers can be used to pry these caps off.
  • You can see screws holding the Delta sink faucet handles to the countertop once the caps have been taken off. These screws can be loosened and eliminated with a screwdriver.
  • After removing the screws, gently lift and wiggle the faucet handles to detach them from the faucet stems.
  • Some Delta double-handle faucets have an escutcheon plate that sits against the sink or countertop. If your Delta faucet has one, you’ll need to remove it to access the faucet’s mounting nuts.
  • Beneath the sink, you should see mounting nuts that hold the faucet in place. Use a basin wrench to loosen and remove these nuts. A basin wrench is a specialized tool designed to reach tight spaces and can be very helpful in this step.
  • Once the mounting nuts are removed, you should be able to lift the Delta double-handle faucet out of the sink or countertop.
  • Before installing a new faucet, clean the area thoroughly to remove any debris or residue left behind by the old faucet.

How To Remove a Delta Kitchen Faucet Spout?

Removing a Delta kitchen faucet spout may vary depending on the specific model and design of the faucet. However, here are some general steps that help you with most Delta kitchen faucets. Before you begin, make sure to turn off the water supply to the faucet.

Look for small set screws on the underside of the Delta faucet spout. This set screw is usually located near the base of the spout, and it secures the spout to the faucet body.

Use an appropriate-size Allen wrench to loosen the set screw. Turn the wrench counterclockwise to loosen the screw, but you don’t need to remove it completely.

With the set screw loosened, try gently wiggling and twisting the spout to break any mineral deposits or seals that may be holding it in place. Some spouts may come off relatively easily, while others may require a bit more effort.

If the spout seems stuck and won’t budge, you can try applying some silicone lubricant or penetrating oil around the base of the spout where it meets the faucet body. Allow the lubricant to work its way in for a few minutes before attempting to remove the spout again.

Once the spout is free and you have wiggled it loose, pull it straight up and off the faucet body.

How To Remove Side Spryaer of The Delta Faucet?

Removing a side sprayer from a Delta faucet is generally a straightforward process. The sprayer is connected to the faucet through a hose, and you’ll need to disconnect it from both ends.

  1. Before starting, turn off the water supply to the Delta faucet. You can usually find the shut-off valves beneath the sink.
  2. To prevent water from spraying when you remove the sprayer, turn on the Delta faucet and allow any remaining water in the lines to drain out.
  3. Disconnect the sprayer from the faucet:
    • a. Look for a plastic or metal nut connecting the sprayer hose to the bottom of the faucet body.
    • b. Use an adjustable wrench to loosen and unscrew this nut counterclockwise.
  4. Disconnect the sprayer from the sprayer hose:
    • a. The other end of the sprayer hose is attached to the sprayer nozzle or handle.
    • b. Hold the sprayer firmly and turn the sprayer nozzle counterclockwise to unscrew it from the hose.
  5. Once both ends of the hose are disconnected, you should be able to remove the side sprayer from the sink area.
  6. After removing the side sprayer, clean the area around the faucet and sprayer connection to remove any debris or residue.

FAQs

Can You Remove Delta Kitchen Faucet Without Tools?

No, it’s not possible to remove a Delta kitchen faucet without tools. There are screws, nuts, and connections that hold the Delta faucet on the sink. To loosen them, you need tools. Without tools, you can’t do anything.

How Do I Remove a Stuck Delta Faucet Handle?

To remove a stuck Delta faucet handle, use WD-40. Spray this around the faucet handle. Give it a few minutes to loosen the handle parts. Now gently wiggle the handle and slowly try to lift it. Also, you can use a faucet handle puller to remove a stuck faucet handle.

Can I Replace a Delta Kitchen Faucet With a Different Brand?

Yes, you can replace a Delta kitchen facet with any brand. The faucet selection does not depend on your previously installed faucet but on the holes in the sink. The new faucet should be compatible with the mounting holes of the sink.

Final Thoughts

Now you know how to remove a Delta kitchen faucet. So, you can remove it and install a new stylish, and durable faucet in the kitchen. While removing the faucet, do it gently otherwise, you may damage the sink and faucet connections. With the right tools and process from this guide, you can easily transform your kitchen sink into a more functional and stylish one with a new faucet.

Leave a Comment