Like other faucets, in Brizo faucets, the aerator is an integral part of the faucet. This small device helps to conserve water and makes the water flow smoothly. In most Brizo faucets the aerators are male, which means threads are present on the aerator.
When the water pressure is low, the solution is quite simple: remove the aerator of the Brizo faucet. Buildups clog the aerator holes and make water pressure slow. By cleaning the aerator, you can get normal water pressure. In this guide, we will see how to remove the aerator from a Brizo faucet.
Is An Aerator Important In The Brizo Faucet?
Not only in the Brizo, the aerator is important for all faucets. It aerates the water flow and slows down the consumption of the water. Its holes convert a giant water stream into dozens of tiny streams and add air into those streams. This process saves water and reduces the water bill and saves you money.
Some people remove the aerator when it is clogged and don’t fit it again. It is not a good idea to use the Brizo faucet without the aerator. The aerator reduces splashes by making the water flow smoothly.
How to Remove the Aerator From a Brizo Faucet?
Brizo faucets offer various faucet designs and the type of aerator can vary based on the specific model. The most common types of Brizo faucets include pull-out or pull-down faucets, and faucets with side sprayers.
Each of these may have different aerator configurations, which could be regular screw-on aerators or concealed aerators within the spray head. To identify the aerator type, examine the faucet spout and check for any visible threading or removable components. We will see how to remove the aerator from these Brizo faucets.
Before you start, turn off the water supply to the faucet. Look under the sink for the shut-off valves and turn them clockwise to close the water supply.
Brizo Faucet With a Side Sprayer
A Brizo faucet with a side sprayer is designed with easily removable aerators that can be unscrewed by hand.
- Place your fingers around the aerator’s outer edges for a secure grip.
- Rotate the aerator in the counterclockwise direction to loosen it from the faucet spout.
- Once it’s loose, continue unscrewing it by hand until you can lift it off the spout.
- Keep the aerator aside on a clean surface or in a container to avoid misplacing it during the cleaning process.
Brizo Pull-Down Kitchen Faucet
In some Brizo pull-down kitchen faucets, the Brizo faucet aerator removal process is not straightforward. You can’t remove the aerator with your hand. In this case, you will need to remove the spout to remove the aerator.
For this process, you need a towel, a rubber band, and a new aerator (if needed).
To begin the process, carefully remove the hose from the Brizo faucet, taking care to prevent it from retracting back to the faucet body by securing a towel around the hose and using a rubber band. Next, proceed to unscrew the spray head.
If you are experiencing a low water flow, start by inspecting the hose itself for any blockages or issues. However, if the problem only occurs when the spray head is attached, it is likely that the screen washer, situated between the sprayer and the hose, needs replacement.
On the other hand, if the low flow issue is still not solved even after removing the spray head, the problem may lie with the Brizo faucet cartridge. In this case, it’s worth checking if there is any warranty coverage for your faucet model with Brizo before purchasing a replacement part. This could potentially save you from unnecessary expenses.
Brizo Pull-Out Faucets
In the Brizo pull-out faucet, the aerator is placed at the face of the sprayer. To remove this aerator, you don’t need any special tools, you can do it with just an Allen key.
- Take the Allen key and hold it flat against the Brizo faucet aerator. Make sure that the key is aligned with the small grooves or notches on the screw. The grooves are there to provide a firm grip and prevent the Allen key from slipping from the aerator.
- With the Allen key firmly in place on the aerator, use your other hand to apply downward pressure on either end of the key. The pressure helps engage the grooves securely.
- Now, slowly turn the Allen key counterclockwise. The turning motion helps to break the initial resistance of the aerator.
- Some aerators might be tightly stuck due to mineral deposits or corrosion. It’s crucial to be patient and avoid using excessive force, as it may lead to damaging the aerator or the Brizo faucet.
- As you continue to turn the Allen key counterclockwise, the aerator should begin to loosen up. Once it becomes loose enough, you should be able to finish the removal process by hand.
How To Change The Aerator on a Brizo Faucet?
With time, the aerator holes won’t remain the same as new ones. After every use of the faucet, the droplets of water are left at the end of the faucet. When these droplets evaporate, they leave small amounts of mineral deposits and clogged holes. It may cause uneven water flow and water comes out through one side of the faucet.
To change the aerator, remove the aerator as described above. Now place the new aerator by hand into position within the Brizo faucet spout and start hand tightening it. If you have the aerator key, you can use it to tighten the aerator.
Brizo Faucet Aerator Removal Without Tool
There are aerator removal tools in the market that make the removal process simple. If you don’t have a tool handy, there are still several methods you can try to remove the Brizo faucet aerator without using any specialized tools.
- Use a Rubber Band: If you find it challenging to grip the aerator with your hands alone, try using a rubber band. Wrap the rubber band around the aerator’s circumference to provide more traction, and then try turning it counterclockwise again.
- Use a Kitchen Knife: Take a regular butterknife and insert the tip of the blade into one of the aerator’s grooves. Apply gentle but steady pressure and attempt to rotate the aerator counterclockwise to remove the aerator.
- Apply WD-40: If the aerator is stuck and none of the above methods work, you can try using a lubricant like WD-40. Spray a small amount of WD-40 on the aerator’s threads and wait a few minutes to let it penetrate. Then, try turning the aerator counterclockwise again using one of the methods mentioned earlier.
Check also
Final Thoughts
By following instructions from this guide, you can remove the Brizo faucet aerator. With a hand, you can remove it. Sometimes, you might need to use simple tools to remove the stuck aerator from the Brizo faucet. After removing the aerator, you can reuse it after cleaning it.
FAQs
How Often Should I Clean The Aerator on My Brizo Faucet?
The frequency of cleaning the aerator depends on the mineral quantities in the water. if minerals are high, the aerator will become clogged quickly and you need to clean it. In such cases, more frequent cleaning may be necessary, possibly every one to three months.
Get Instant Solutions For Your Home Issues For Free - Chat With Experts
Get Paid For Your Opinion With Online Surveys - Start Earning
Are Aerators Interchangeable Among Different Brizo Faucets?
The aerator fits at the faucet spout end so its size may be different for different faucets according to the spout size. You can interchange aerators if the spout size is the same for those Brizo faucets.
James Lewis is a seasoned plumber and faucet enthusiast who shares his expertise on Faucetsavvy.com. With over 15 years of experience in the plumbing industry, he’s passionate about helping homeowners find the perfect faucet for their needs. He’s also dedicated to empowering DIY enthusiasts with the plumbing knowledge and skills needed to repair and maintain their faucets.