How To Remove Delta Faucet Handle No Visible Screws? [DIY Steps]

Delta is one of the best-quality faucet brands. Delta faucet is found in many kitchens. Delta faucets are good for cleaning and washing tasks. If your Delta faucet is not working properly, you need to repair it. But to repair the Delta faucet, first, you need to remove the Delta faucet handle.

Nowadays, there are no visible screws on the Delta faucet handle. So how will you remove the Delta faucet handle with no visible screws?

In this guide, we will explore simple steps to remove your Delta faucet handle without any screws. These DIY steps can be followed by beginners also.

Tools You Needed To Remove The Delta Faucet Handle

Here is the list of tools you need to remove the Delta faucet handle without screws. I have also explained the use of every tool.

• Flathead Screwdriver – This is needed to remove the handle cap of the Delta faucet.
• Allen Wrench – It is an L-shaped and small tool. It easily removes the set screw of the Delta faucet.
• Pliers – If the handle of the faucet is stuck, Pliers are good to grip and twist the handle.
• Soft Cloth – This is essential to cover the handle and prevent it from scratches.
• Replacement Parts – If any part is damaged, you need its replacement part.

Check also – How To Remove Moen Faucet Handle Without Screws?

How To Remove Delta Faucet Handle With No Visible Screws?

When you all have these tools, you can start the process of removing the Delta faucet handle that has no visible screws. While removing the Delta faucet handle, don’t apply so much force. High force might break the faucet or any parts of it. Follow the below steps to successfully remove a Delta faucet handle with hidden screws.

Step 1 – Turn off the Water

Start with turning off the water to the Delta faucet. For this close the valve under the sink.

Under the sink, there might be not enough light, so use a flashlight for clean vision. Now turn the valve in a clockwise direction to turn off the water.

It will prevent any water leak when you remove the handle. If the water leak happens, it will make the Delta faucet handle removal process tough.

If you have a two-handle Delta faucet, then there would be 2 valves under the sink. Turn both valves in the clockwise direction to turn off the water supply.

Step 2 – Remove The Handle Cap

Nowadays it is common that you won’t see any screws on the Delta faucet handle.

Now carefully see the handle of the Delta faucet. You will see the cap on the handle. When you remove this cap, you will see the hidden screw on the handle.

A flathead screwdriver is the perfect tool to remove this cap. If you don’t have a flathead screwdriver, you can use a knife or any similar tool whose front part is flat.

Gently insert the screwdriver under the edge of the cap and pry off the cap. In this process, the screwdriver may slip. So it would be better if you cover the handle with a cloth to prevent scratches.

Once you remove the cap, you see the hidden screw on the handle of the Delta faucet. Keep this cap aside, you need it when you reattach the handle.

Step 3 – Remove The Handle

Now the screw on the handle is visible, you can remove it. Use an Allen wrench to remove this screw. Fit the front portion of the Allen wrench into the screw and turn it in a clockwise direction.

Once you remove the hidden screw on the handle of the Delta faucet, you can easily remove the handle. If the handle is stuck due to corrosion or rust, spray penetration oil on it and wait for a few minutes.

Now use a plier to make a tight grip on the handle. Pull the handle outside with the help of pliers.

What To Do After Removing The Delta Faucet Handle?

Now you have removed the handle of the Delta faucet, you can replace its damaged parts, clean mineral buildups, and lubricant it.

After removing the handle, you can check the cartridge, stem, and other parts inside the Delta faucet. If you find any damaged part, you should replace it. You can find the new part according to the Delta faucet model.

If you have not opened the handle for many years, you will find mineral deposits inside it. Spray vinegar, baking soda, or lemon juice on the deposits and wait for an half hour. After that rinse it with clean water.

If you see any rust or corrosion inside the faucet, you should lubricant there. Use penetration oil or WD-40 on rusted parts to clean them.

Now, it’s time to reattach the Delta faucet handle. Reattach the handle at its actual position. Insert the hidden screw of the handle in the hole and tighten it with the Allen wrench.

After tightening the screw, reattach the cap on the screw.

Common Issues That May Arise While Removing The Delta Faucet Handle

Handle Is Stuck

The handle might be stuck. In this situation, you can’t remove the handle. This may happen due to rust or corrosion. It may also happen when the handle is tightened too much at the time of the installation. In this situation, you should use penetration oil to unstick the handle.

Screw Is Stripped

The screw might be stripped because of over-tightening. It can cause the screw threads to wear down and become stripped. If you use the wrong type of wrench or apply too much force with a wrench can damage the screw head and lead to stripping

Final Thoughts

Now you know how to remove a Delta faucet handle with no visible screws. With this process, you can remove the handle and repair its damaged parts, clean the handle from the inside. It is a DIY plumbing process that can be performed by anyone.

FAQs

James Lewis

James Lewis is a seasoned plumber and faucet enthusiast who shares his expertise on Faucetsavvy.com. With over 15 years of experience in the plumbing industry, he’s passionate about helping homeowners find the perfect faucet for their needs. He’s also dedicated to empowering DIY enthusiasts with the plumbing knowledge and skills needed to repair and maintain their faucets.