Having no water in kitchen but everywhere else is a frustrating and perplexing issue for homeowners. This situation disrupts your daily routine tasks such as cooking, cleaning, and washing dishes. In this situation, water freely flows into other parts of the house but not only in the kitchen.
Finding its cause is important to find the right solution. There may be low water pressure, blocked pipelines, faulty faucet, or any other issues. Because of these issues, a kitchen faucet won’t dispatch water. Here are our tested methods to solve the no-water problem in the kitchen faucet.
Why is No Water In Kitchen But Everywhere Else?
Damaged Waterlines
Damaged water lines cause a lack of water flow. It causes no water in the kitchen faucet. Water reaches to faucet through waterlines but when waterlines are damaged, water won’t come out from the kitchen faucet.
Damage can occur due to various reasons, such as age, corrosion, or external factors like accidental impact.
If there is a leak in the waterline of the kitchen, it will cut off the water supply eventually. The leak can be caused by cracks, holes, or loose connections in the pipes.
Clogged Pipes
When you are getting water from other faucets of the house but not in the kitchen, clogged pipes can be another reason. Over time, pipes can accumulate mineral deposits, debris that hinder the flow of the water.
Especially in the area of hard water, mineral deposits can build up inside the pipes. With time, these buildups restrict the diameter of the pipe and stop the flow of water.
Faulty Washer of Faucet
The washer of a faucet creates a watertight seal and controls the flow of water. over time, due to frequent use of the faucet, the washer gets damaged. When the washer is damaged and not in good condition, it can impede the proper functioning of the faucet.
When the washer is faulty, it won’t be able to create a proper seal and the result is the lack of water in the kitchen faucet. In some cases, a damaged washer can prevent water from reaching the faucet altogether, causing no water to come out when the handle is turned on.
Airlock In The Plumbing System
An airlock can occur when air becomes trapped within the plumbing system. This can happen due to various reasons, such as improper installation, changes in water pressure, or disruptions in the water supply.
When an airlock forms in the specific pipes connected to the kitchen faucet, it can hinder the flow of water.
The trapped air creates a blockage within the pipes, preventing water from flowing smoothly and causing a lack of water in the faucet. This issue is more common in vertical sections of the plumbing system, where air tends to rise and accumulate.
Defective Water Valve
The water valve turns on or off the water supply to the faucet. When the valve is in the off position, you won’t get any water from the kitchen faucet. While fixing any plumbing issue, the plumber turns off the valve.
Also, it is possible that someone has shut down the valve for any plumbing work but didn’t open it again. The check valve is in the on position or not?
If the valve is old, it may become defective and it may fail to open properly and restrict or completely block the way of water.
Faulty Faucet
A faulty or damaged faucet can also be a cause of no water in the kitchen faucet. There are many internal parts of the faucet that controls the flow of water. There is life in every part so with time, these parts become damaged.
With damaged parts, the faucet won’t work properly and there would be no way to flow the water and lead to no water when the faucet handle is opened. For instance, a malfunctioning cartridge may fail to open or close effectively, resulting in restricted or no water flow.
Frozen Pipes
In colder climates or during winter, when temperatures drop significantly, exposed or poorly insulated pipes in the kitchen can freeze.
When water freezes, it expands, which can cause pipes to crack or burst. If the pipes connected to the kitchen faucet freeze, it can obstruct the water flow, resulting in no water coming out of the faucet.
The frozen portion of the pipe acts as a barrier, preventing water from reaching the faucet. It’s important to address frozen pipes promptly to prevent further damage and to thaw them safely to restore water flow.
Get Instant Solutions For Your Home Issues For Free - Chat With Experts
Get Paid For Your Opinion With Online Surveys - Start Earning
Faulty Water Heater
If the kitchen faucet is connected to the water heater, a malfunctioning water heater can impact the water supply to the faucet. If the cold water is coming out from the kitchen faucet, but not hot, it means definitely there is an issue with the water heater.
Potential causes of a faulty water heater include a broken heating element, a malfunctioning thermostat, a gas supply issue, or a buildup of sediment in the tank.
How To Fix No Water In Kitchen Faucet But Everywhere Else?
Fix Damaged Waterlines
To fix damaged waterlines, check for visible leaks. Inspect the area under the sink and around the waterlines for any visible leaks or signs of damage. If you find any, they may be causing the water blockage. In such cases, you may need to repair or replace the damaged section of the waterline.
If the damage is small, you can use Teflon tape to cover the damage. If the leak is not getting controlled by the Teflon tape, you need to replace the damaged part.
Clean Clogged Pipes
To clean clogged pipes, first, check if there is any blockage in the kitchen faucet itself or not. Check the faucet aerator for any mineral buildup. If yes, clean it.
Now check the water lines of the faucet. Turn off the water supply and Inspect these lines for any obstructions, such as sediment or debris. To clean them, flush out lines with water. If the problem continues, the clog maybe somewhere else in the water line. Here you need to use the help of a professional plumber to remove clog from the water line.
To prevent clogging in the feature, you should install a water filtration system or water softener.
Repair Faulty Washer of Faucet
Start by turning off the water supply to the faucet. Remove the handle and the valve stem assembly to access the washer. Inspect the washer for signs of wear, cracks, or debris. If it’s damaged, replace it with a new washer of the same size and type.
Fix Airlock In The Plumbing System
Start by turning off the water supply to the affected faucet. Then, open the kitchen faucet completely, including both the hot and cold water handles. Leave them open for a few minutes to allow any trapped air to escape. Once the time has passed, turn off the faucet and slowly turn the water supply back on. Check if the water flows properly.
While fixing the airlock, it’s helpful to open other faucets in your house to release air from the system. This can include nearby bathroom faucets or outdoor faucets. The idea is to create an even flow of water throughout the plumbing system, which can help dislodge the airlock.
If the airlock persists, you can try using a hose or tap connector to force water through the system. Attach a hose or tap connector to the affected faucet and connect the other end to a different faucet that has water flowing properly.
Turn on both faucets simultaneously, allowing the water from the working faucet to push through the airlock and clear the obstruction.
Fix the Defective Water Valve
Locate the shut-off valve under the sink and ensure it is fully open. Sometimes the valve can accidentally get closed or partially closed, restricting water flow. Turn it counterclockwise to fully open it.
If the valve is damaged, you need to replace it. Use an adjustable wrench to remove the valve. Install the new valve and tighten it properly. Turn on the water supply and check the faucet.
Repair Faulty Faucet
Ensure that the faucet handle is fully turned on. Sometimes, the handle may not be fully engaged, causing a partial or complete blockage of water flow. Make sure the handle is in the open position.
Over time, mineral deposits and debris can accumulate in the aerator, blocking the water flow. Unscrew the aerator at the end of the faucet spout and clean it thoroughly with the vinegar. If cleaning doesn’t help, consider replacing the aerator altogether.
Inside the faucet, there may be a cartridge or valve responsible for regulating the water flow. Sediments or debris can accumulate and clog these components, causing a disruption in the water supply.
Remove the handle to access the cartridge. Use a wrench to remove the cartridge nut. To clean the cartridge, soak it in vinegar and water mixture for 30 minutes. After cleaning, reinstall the cartridge.
Clean Frozen Pipes
- Check if any other faucets in the house are also affected. If they are, it indicates a common frozen pipe issue.
- Locate the area where the pipe is frozen. This is often in exposed areas such as basements, crawl spaces, or exterior walls.
- Use a hairdryer or a heat gun to carefully thaw the frozen section of the pipe. Start from the faucet end and work your way toward the frozen area.
- Apply heat evenly and avoid using open flames or high-temperature heating sources that may cause damage.
- Insulate the pipes properly to prevent future freezing. Use pipe insulation sleeves or heat tape in vulnerable areas.
Repair Faulty Water Heater
- Check if the lack of water is specific to hot water only. If both hot and cold water are affected, the issue may not be related to the water heater.
- Verify that the water heater is receiving power by checking the circuit breaker or fuse box.
- If the water heater is gas-powered, make sure the pilot light is lit. Follow the manufacturer’s instructions to relight it if necessary.
- Check the temperature setting on the water heater. It should be set to an appropriate level (usually around 120°F or 49°C).
No Water In the Kitchen Sink But Everywhere Else During Freeze
If you are not getting in the kitchen faucet during the freeze, it may happen due to frozen pipes. In the winter due to low temperatures, in some areas, water in the pipes is frozen. A frozen pipe causes a blockage in the flow of water.
During the freezing temperature, if you don’t insulate or protect the pipe, it may burst. If the pipe connected to the kitchen sink faucet is frozen, you won’t get water from the faucet. Here are a few simple steps to solve the issue.
- Check what part of the pipe is frozen. You will see bulges or frost on the exterior part of the pipe.
- When you find out about the frozen pipe, try to thaw it. To warm up the pipe, use a hair dryer, a heat lamp, or towels soaked in warm water.
- Once you have thawed the frozen pipes, consider insulating them to prevent future freezing. You can use pipe insulation sleeves or wrap the pipes with heat tape to provide insulation and protect against freezing.
Why Is My Kitchen Faucet Not Working But Sprayer Does?
Some people use a kitchen faucet with a sprayer. The water supply lines for the kitchen faucet and sprayer are different. When a kitchen faucet doesn’t work but the sprayer works, it means there is no issue with the water supply. The issue is within the faucet. Here are common possible reasons.
Clogged Aerators
The aerator is a small part of the faucet spout. Its holes may become clogged due to mineral buildup and stop the flow of water. To clean the aerator holes, you need to soak them in vinegar for an hour. Remove the aerator from the faucet and soak it in vinegar. After an hour, take out the aerator from the vinegar and clean it with water and reattach it.
Valve or Cartridge Issue
If the valve or cartridge of the faucet is not in good condition, water won’t come out from the kitchen faucet. These are internal parts of the faucet so they won’t affect water flow in the sprayer. In this situation, you need to replace the valve or cartridge.
Blockage In The Faucet
There could be a blockage or debris buildup within the faucet itself, such as in the water supply lines or the internal components. This can impede water flow through the faucet while not affecting the sprayer. Cleaning or flushing the faucet can sometimes help to remove the blockage.
Final Words
Now you know why no water in kitchen but everywhere else. Check each cause and apply the solution according to it from the guide. In some conditions, you need to call the professionals. While getting water back it is crucial to prevent any further damage and restore the proper functionality of your kitchen faucet.
James Lewis is a seasoned plumber and faucet enthusiast who shares his expertise on Faucetsavvy.com. With over 15 years of experience in the plumbing industry, he’s passionate about helping homeowners find the perfect faucet for their needs. He’s also dedicated to empowering DIY enthusiasts with the plumbing knowledge and skills needed to repair and maintain their faucets.